View LTPL-P00DMS27_9085728.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lite-on technology corporation office office office office : 90, chien i road, chung ho taipei, taiwan, r.o.c. tel teltel tel : +886-2-2222-6181 ~ 8 fax faxfax fax : + 886-2-2221-0660, +886-2-2221-2780,+886-2-2225-1518 high power led ltpl -p0 0dms-27 data sheet
lite-on technology corporation property of lite-on only part no.: ltpl-p00dms-27 page: 1 of 13 bnc-od-c131/a4 1. description the ltpl (liteon power led) is a revolutionary, ene rgy efficient and ultra compact new light source, combining the lifetime and reliability advantages o f light emitting diodes with the brightness of conventional lighting. it gives you total design fr eedom and unmatched brightness, creating a new opportunities for solid state lighting to displace conventional lighting technologies. features high power led light source long life, up to 100k hours instant light (less than 100 ns) low voltage dc operated low thermal resistance rohs compliant lead free reflow solder compatible applications reading lights portable (flashlight, bicycle) downlighters/orientation decorative/entertainment bollards/security/garden cove/undershelf/task traffic signaling/beacons/ rail crossing and waysi de indoor/outdoor commercial residential architectura l edge_lit signs (exit, point of sale) 2. outline dimensions notes 1. all dimensions are in millimeters. 2. tolerance is 0.2 mm (.008") unless otherwise no ted.
lite-on technology corporation property of lite-on only part no.: ltpl-p00dms-27 page: 2 of 13 bnc-od-c131/a4 3. rating and characteristics absolute maximum ratings at ta=25c parameter symbol rating unit power dissipation po 0.3 w forward current * 1 i f 75 ma forward pulse current * 1, *2 i fp 90 ma reverse voltage * 1 v r 10 v junction temperature t j 115 c thermal resistance, junction-case r th, j-c 12.16 c/w thermal resistance, junction-ambient r th, j-a 19.66 c/w operating temperature range t opr -40 - 85 c storage temperature range t stg -40 - 100 c notes 1. the value are based on one die performance. 2. the pulse mode condition is 1/10 duty cycle with 100 msec pulse width. 3. forbid to operating at reverse voltage condition for long.
lite-on technology corporation property of lite-on only part no.: ltpl-p00dms-27 page: 3 of 13 bnc-od-c131/a4 electro-optical characteristics at ta=25c parameter symbol min. typ. max. test condition unit forward voltage* 1 v f 2.7 3.27 3.8 i f = 75ma* 1 v luminous flux* 2 v 23.5 45 61.2 i f = 75ma* 1 lm reverse current* 1 i r 100 v r = 10v* 1 a color rendering index cri 80 i f = 75ma *1 view angle* 2 2 1/2 120 i f = 75ma* 1 chromaticity coordinates* 2 cx 0.459 i f = 75ma* 1 cy 0.410 i f = 75ma* 1 notes 1. for each die. 2. when all led dies are operated simultaneously. 3. luminous flux is the total luminous flux output as measured with an integrating sphere. 4. the chromaticity coordinates (x, y) is derived f rom the cie 1931 chromaticity diagram. 5. luminous flux measurement allowance is 7.5%. 6. forward voltage measurement allowance is 0.1v. 7. color coordinates (x, y) measurement allowance i s 0.005. 8. color rendering (ra) measurement allowance is 2 .
lite-on technology corporation property of lite-on only part no.: ltpl-p00dms-27 page: 4 of 13 bnc-od-c131/a4 typical electrical / optical characteristics curve s 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 400 450 500 550 600 650 700 750 wavelength (nm) relative intensity fig 1. relative spectrum of emission 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% relative intensity (%) 90 60 30 0 50 100 60 30 0 fig 2. radiation characteristics
lite-on technology corporation property of lite-on only part no.: ltpl-p00dms-27 page: 5 of 13 bnc-od-c131/a4 0 50 100 150 200 2.5 2.6 2.7 2.8 2.9 3 3.1 3.2 forward voltage vf (v) forward current if (ma) fig 3. forward current 0 20 40 60 80 100 120 140 160 180 200 60 80 100 120 ambient temperature (c) forward current i f (ma) fig 4. forward current derating curve 0% 20% 40% 60% 80% 100% 120% 0 50 100 150 200 forward current if (ma) relative luminous flux (%) fig 5. relative luminous flux 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0 50 100 150 200 forward current if (ma) chromaticity coordinates x, y x y fig 6. chromaticity coordinate shift rth,j-a=40 /w rth,j-a=30 /w rth,j-a=20 /w rth,j-a=10 /w
lite-on technology corporation property of lite-on only part no.: ltpl-p00dms-27 page: 6 of 13 bnc-od-c131/a4 4. category code table p k s1 chromaticity coordinate categories code x y code x y code x y m1 0.4625 0.4113 m2 0.4520 0.3927 m3 0.4546 0.4095 (2700) 0.4729 0.4299 (2700) 0.4625 0.4113 (2700) 0.4646 0.4280 0.4813 0.4319 0.4703 0.4132 0.4729 0.4299 0.4703 0.4132 0.4593 0.3944 0.4625 0.4113 m4 0.4446 0.3910 m5 0.4468 0.4077 m6 0.4373 0.3893 (2700) 0.4546 0.4095 (2700) 0.4562 0.4260 (2700) 0.4468 0.4077 0.4625 0.4113 0 .4646 0.4280 0.4546 0.4095 0.4520 0.3927 0.4546 0.4095 0.4446 0.3910 p1 0.4386 0.4048 p2 0.4298 0.3867 p3 0.4305 0.4019 (3000) 0.4474 0.4228 (3000) 0.4386 0.4048 (3000) 0.4387 0.4197 0.4562 0.4260 0.4468 0.4077 0.4474 0.4228 0.4468 0.4077 0.4373 0.3893 0.4386 0.4048 p4 0.4222 0.3840 p5 0.4223 0.3990 p6 0.4147 0.3814 (3000) 0.4305 0.4019 (3000) 0.4299 0.4165 (3000) 0.4223 0.39 90 0.4386 0.4048 0.4387 0.4197 0.4305 0.4019 0.4298 0.3867 0.4305 0.4019 0.4222 0.3840 luminous flux categories cct bin grade spec code min max m: 2550-2850 k p0 23.5 30.6 p: 2850-3200 k q0 30.6 39.8 r0 39.8 51.7 s0 51.7 61.2 notes 1. the value is all dies operated performance with forward current 75ma per die. 2. luminous flux measurement allowance is 7%.
lite-on technology corporation property of lite-on only part no.: ltpl-p00dms-27 page: 7 of 13 bnc-od-c131/a4 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 cx cy 3200k 2850k 2550k p3 p5 p6 p1 p4 p2 m3 m5 m6 m1 m4 m2 notes 1. the value is all dies operated performance. 2. the chromaticity coordinates (x, y) is derived f rom the cie 1931 chromaticity diagram. 3. is cas140b is for the luminous flux (lm) and the cie1931 chromaticity coordinates (x, y) testing. the chromaticity coordinates (x, y) guarantee shoul d be added 0.005 tolerance. p6 p4 p2 p1 p3 p5 3200k
lite-on technology corporation property of lite-on only part no.: ltpl-p00dms-27 page: 8 of 13 bnc-od-c131/a4 5. reflow soldering characteristics time temperature t p preheat, t s t l t smin t smax 25 c to peak, t t l ramp-dow n ramp-up t p profile feature lead free assembly average ramp-up rate (t smax to t p ) 3c / second max preheat temperature min (t smin ) 150c preheat temperature max (t smax ) 200c preheat time (t smin to t smax ) 60 C 180 seconds time maintained above temperature (t l ) 217c time maintained above time (t l ) 60 C 150 seconds peak / classification temperature (t p ) 260c time within 5c of actual peak temperature (t p ) 5 seconds ramp C down rate 6c / second max time 25c to peak temperature 8 minutes max notes: 1. the leds can be soldered using the reflow solder ing or hand soldering method. the recommended hand soldering condition is 350c max. and 2secs ma x. for one time only. 2. all temperatures refer to topside of the package , measured on the package body surface. 3. the soldering condition referring to j-std-020b. if the leds were unpacked more than 24hrs, baking the leds at 60 for 60 mins before soldering process. 4. the soldering profile could be further referred to different soldering grease material characterist ic. the grease vendor will provide this information. 5. a rapid-rate process is not recommended for the leds cooling down from the peak temperature. 6. although the recommended reflow conditions are s pecified above, the reflow or hand soldering condition at the lowest possible temperature is des irable for the leds. 7. liteon cannot make a guarantee on the leds which have been already assembled using the dip soldering method
lite-on technology corporation property of lite-on only part no.: ltpl-p00dms-27 page: 9 of 13 bnc-od-c131/a4 6. recommend solder pad solder pad design notes: 1. all dimensions are in millimeters 2. the circle metallization board and lead contact pad is electrically isolated.
lite-on technology corporation property of lite-on only part no.: ltpl-p00dms-27 page: 10 of 13 bnc-od-c131/a4 7. package dimensions of tape and reel notes: 1. empty component pockets sealed with top cover ta pe. 2. 1000 pieces per 7 inch real. (min. packing quant ities are 500 pieces for remainders) 3. the maximum number of consecutive missing led is two. 4. in accordance with eia-481-1-l23 specifications.
lite-on technology corporation property of lite-on only part no.: ltpl-p00dms-27 page: 11 of 13 bnc-od-c131/a4 8. cautions application the leds described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household ap plications).consult liteons sales in advance for information on applications in which exceptiona l reliability is required, particularly when the fa ilure or malfunction of the leds may directly jeopardize life or health (such as in aviation, transportation , traffic control equipment, medical and life support systems and safety devices). storage this product is qualified as moisture sensitive lev el 4 per jedec j-std-020 precaution when handing this moisture sensitive product is importan t to ensure the reliability of the product. the package is sealed: the leds should be stored at 30 o c or less and 90%rh or less. and the leds are limit ed to use within one year, while the leds is packed in moistu re-proof package with the desiccants inside. the package is opened: the leds should be stored at 30 o c or less and 60%rh or less. moreover, the leds are limited to solder process within 72hrs. if the humidity indica tor shows the pink color in 10% even higher or exceed the storage limiting time since opened, that we recommended to be with workable desiccants in original package. drive method an led is a current-operated device. in order to en sure intensity uniformity on multiple leds connected in parallel in an application, it is reco mmended that a current limiting resistor be incorporated in the drive circuit, in series with e ach led as shown in circuit a below. led led circuit model a circuit model b (a) recommended circuit. (b) the brightness of each led might appear differe nt due to the differences in the i-v characteristic s of those leds.
lite-on technology corporation property of lite-on only part no.: ltpl-p00dms-27 page: 12 of 13 bnc-od-c131/a4 reliability test test item test condition test point number of damaged resistance to soldering heat t sld = 260 o c, 10 sec 1 time 0 / 22 solderability t sld = 245 5 o c, 3 sec 1 time 0 / 22 high temperature operating life 85 o c, i f = 90ma/die 1000 hours 0 / 22 high temperature and high humidity life 85 o c / 85%rh, i f = 90ma/die 1000 hours 0 / 22 temperature cycle -40 o c / 100 o c, 15 min dwell, < 5 min transfer 200 cycles 0 / 22 thermal shock -40 o c / 100 o c, 30 min dwell, < 20 sec transfer 200 cycles 0 / 2 2 high temperature storage t a = 100 o c 1000 hours 0 / 22 low temperature storage t a = -40 o c 1000 hours 0 / 22 criteria for judging the damage criteria for judgment item symbol test condition min. max. forward voltage vf i f = 75ma/die u.s.l. x 1.1 luminous intensity lm i f = 75ma/die l.s.l. x 0.7
lite-on technology corporation property of lite-on only part no.: ltpl-p00dms-27 page: 13 of 13 bnc-od-c131/a4 esd (electrostatic discharge) static electricity or power surge will damage the l ed. suggestions to prevent esd damage: use a conductive wrist band or anti-electrostatic glove when handling these leds. all devices, equipment, and machinery must be prop erly grounded. work tables, storage racks, etc. should be properl y grounded. use ion blower to neutralize the static charge whi ch might have built up on surface of the leds plastic lens as a result of friction between leds d uring storage and handling. esd-damaged leds will exhibit abnormal characterist ics such as high reverse leakage current, low forward voltage, or no light up at low currents. to verify for esd damage, check for light up and v f of the suspect leds at low currents. the v f of good leds should be >2.0v@0.1ma for ingan product. suggested checking list static-safe workstation & work areas 1. static-safe working stations or work-areas have esd signs. 2. all surfaces and objects at all static-safe work station and within 1 ft measure less than 100v. 3. all ionizer activated, positioned towards the un its. 4. each work surface mats grounding is good. personnel grounding 1. every person (including visitors) handling esd s ensitive (esds) items wear wrist strap, heel strap or conductive shoes with conductive flooring. 2. if conductive footwear used, conductive flooring also present. 3. garments, hairs or anything closer than 1 ft to esd items measure less than 100v. 4. the wrist strap or heel strap/conductive shoes a re checked daily and result recorded. 5. all wrist strap or heel strap checkers calibrati on up to date. device handling 1. each esds items identified by eia-471 labels on item or packaging.. 2. no static charge generators (e.g. plastics) insi de shielding containers with esds items. 3. all flexible conductive and dissipative package materials are inspected before reuse or recycles

▲Up To Search▲

Price & Availability of LTPL-P00DMS27

	To Download LTPL-P00DMS27 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .